Match 64: 1416 D HB 23" Thumhole - German Version .22LR

Match 64: 1416 D HB 23" Thumhole - German Version  .22LR

Click on image to enlarge

 

Bookmark and Share

Luxus repeaters of the series 1416

The Match 64 action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43 inch wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch on the right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged.

At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style".

Trigger:
Single stage trigger 5094 D. Range of adjustment 2.20 - 4.41 lbs. Adjusted to 2.64 lbs.

Barrel:
The barrels are manufactured using the same special process perfected for our target rifles. The same attention to detail is given to the fitting of the receiver and the counterbore at the muzzle.

Stock:
Well-balanced, oiled walnut thumbhole stock with roll-over cheek piece, wide beavertail stock and non-slip carved German checkering on the pistol grip, black plastic butt cap and sling swivel studs.

 

« Back to Anschutz Hunting Rifles